Flammability Testing of Super Therm Water-Based Paint

 
 "The subject material has been tested for flammability by the procedures outlined in NHB 8060.IBIC, Test 1.

The material, parameters and results are as follows:

Material: Supertherm Water-Based Paint
Manufacturer: Superior Products
Composition: Acrylic & Polyurethane with Ceramic Filler
Submitted by: EH43/D. Griffin
Material Code: 02181

Cure: 2 coats applied per test sample:
(1) 2 hours, 75F., 14.7 psia
(2) 336 hours, 75F., 14.7 psia
Sample Size: 2.5" x 12"
Substrate: 0.020" Aluminum

The subject material met the acceptance criteria of NHB 8060.1BIC Test 1. The overall rating was determined by an analysis of all available data."

C.F. Key
Deputy Director
Materials & Processes Laboratory
5/3/95

Toxic Offgassing of Supertherm Water-Based Paint

"The subject material has been tested for toxic offgassed products by the procedures outlined in NHB 8060.IC, Test 7, Space Orbitor.

The material, parameters and results are as follows:

Material: Super Therm Water-Based Paint Manufacturer: Superior Products Int'l., Inc. Cure: 1st coat: 2 hours, 75R, 14.7 psia

2nd coat: 336 hours, 75R, 14.7 psia Composition: Acrylic & Polyurethane with Ceramic Filler.

Material Code: 02181
Item Number: 103903
Project: Space Station Study
Submitted by: EH43/D. Griffin
Test Number: M103903-D
Test Temperature: 120F.
Sum T100 Value: .02196

Max. Limit Weight: 2276.87 lbs.
Rating: K

The subject material met the acceptance criteria of NHB 8069.1C for toxic offgassing.  Please ensure that any subsequent cleaning or modification does not invalidate the test results and require retesting An overall rating of K has been given to this material for toxicity."

C.F. Key
Deputy Director
Materials & Processes Laboratory
5/16/95

Beating the Heat
Private Industry Testing

Metal roof in Sevilla, Spain; temperature readings taken 8:00 am and 2:00 pm to determine increase of heat load from the coolest point of the day to the hottest; Super Therm is represented by "Ceramical," under private label usage.  "The coating was applied at the beginning of the 6th day as registered on the chart indicated. At the 6th day marker, a noticeable temperature difference developed between the temperature fluctuation of the morning and afternoon exterior reading, and the interior temperature readings under the ceramic coating. This shows the instant results produced by the application of the coating.

On the 6th day, the morning exterior temperature was 18°C, increasing to 50°C degrees by 2:00 p.m. The interior temperature began at 25°C degrees and only increased to 28C. degrees. Each day afterward, the exterior temperature increased along the same measurement while the interior temperature changed only 1-2 degrees from the beginning reading to the afternoon reading."

LIMITED WARRANTY:
Unless Superior Products provides a written warranty of fitness for a particular use, Superior Product's sole warranty is that the product, as supplied, will meet the current sales specifications and is specific only to return of product found to be defective upon opening of container within one year.  Customer's exclusive remedy and Superior's sole liability for breach of warranty is limited to refund of the purchase price or replacement of any product shown to be other than as warranted and Superior Products expressly disclaims any liability for incidental or consequential damages.